use super::{From, TryFrom};
use crate::num::TryFromIntError;

mod private {
    /// 从 crate 外部无法访问此 trait 会阻止 `FloatToInt` trait 的其他实现，这可能会在 trait 为 `#[stable]` 之后潜在地添加更多 trait 方法。
    ///
    ///
    #[unstable(feature = "convert_float_to_int", issue = "67057")]
    pub trait Sealed {}
}

/// 支持 `f32` 和 `f64` 的固有方法 (例如 `to_int_unchecked`) 的 trait。
/// 通常不需要直接使用。
#[unstable(feature = "convert_float_to_int", issue = "67057")]
pub trait FloatToInt<Int>: private::Sealed + Sized {
    #[unstable(feature = "convert_float_to_int", issue = "67057")]
    #[doc(hidden)]
    unsafe fn to_int_unchecked(self) -> Int;
}

macro_rules! impl_float_to_int {
    ( $Float: ident => $( $Int: ident )+ ) => {
        #[unstable(feature = "convert_float_to_int", issue = "67057")]
        impl private::Sealed for $Float {}
        $(
            #[unstable(feature = "convert_float_to_int", issue = "67057")]
            impl FloatToInt<$Int> for $Float {
                #[inline]
                unsafe fn to_int_unchecked(self) -> $Int {
                    // SAFETY: 调用者必须坚持安全保证。
                    unsafe { crate::intrinsics::float_to_int_unchecked(self) }
                }
            }
        )+
    }
}

impl_float_to_int!(f32 => u8 u16 u32 u64 u128 usize i8 i16 i32 i64 i128 isize);
impl_float_to_int!(f64 => u8 u16 u32 u64 u128 usize i8 i16 i32 i64 i128 isize);

// 原始整数和浮点类型的转换 traits 转换 T -> T 由一揽子 impl 覆盖，因此被排除。由于可移植性方面的考虑，未实现从 usize/isize 到 usize/isize 的某些转换。
//
//
macro_rules! impl_from {
    ($Small: ty, $Large: ty, #[$attr:meta], $doc: expr) => {
        #[$attr]
        impl From<$Small> for $Large {
            // impl 块上的 Rustdocs 显示了一个 "[+] 显示未记录的项" 切换。
            // 函数上的 Rustdocs 不支持。
            #[doc = $doc]
            #[inline(always)]
            fn from(small: $Small) -> Self {
                small as Self
            }
        }
    };
    ($Small: ty, $Large: ty, #[$attr:meta]) => {
        impl_from!($Small,
                   $Large,
                   #[$attr],
                   concat!("Converts `",
                           stringify!($Small),
                           "` to `",
                           stringify!($Large),
                           "` losslessly."));
    }
}

macro_rules! impl_from_bool {
    ($target: ty, #[$attr:meta]) => {
        impl_from!(bool, $target, #[$attr], concat!("Converts a `bool` to a `",
            stringify!($target), "`. The resulting value is `0` for `false` and `1` for `true`
values.

# Examples

```
assert_eq!(", stringify!($target), "::from(true), 1);
assert_eq!(", stringify!($target), "::from(false), 0);
```"));
    };
}

// Bool -> Any
impl_from_bool! { u8, #[stable(feature = "from_bool", since = "1.28.0")] }
impl_from_bool! { u16, #[stable(feature = "from_bool", since = "1.28.0")] }
impl_from_bool! { u32, #[stable(feature = "from_bool", since = "1.28.0")] }
impl_from_bool! { u64, #[stable(feature = "from_bool", since = "1.28.0")] }
impl_from_bool! { u128, #[stable(feature = "from_bool", since = "1.28.0")] }
impl_from_bool! { usize, #[stable(feature = "from_bool", since = "1.28.0")] }
impl_from_bool! { i8, #[stable(feature = "from_bool", since = "1.28.0")] }
impl_from_bool! { i16, #[stable(feature = "from_bool", since = "1.28.0")] }
impl_from_bool! { i32, #[stable(feature = "from_bool", since = "1.28.0")] }
impl_from_bool! { i64, #[stable(feature = "from_bool", since = "1.28.0")] }
impl_from_bool! { i128, #[stable(feature = "from_bool", since = "1.28.0")] }
impl_from_bool! { isize, #[stable(feature = "from_bool", since = "1.28.0")] }

// Unsigned -> Unsigned
impl_from! { u8, u16, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u8, u32, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u8, u64, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u8, u128, #[stable(feature = "i128", since = "1.26.0")] }
impl_from! { u8, usize, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u16, u32, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u16, u64, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u16, u128, #[stable(feature = "i128", since = "1.26.0")] }
impl_from! { u32, u64, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u32, u128, #[stable(feature = "i128", since = "1.26.0")] }
impl_from! { u64, u128, #[stable(feature = "i128", since = "1.26.0")] }

// Signed -> Signed
impl_from! { i8, i16, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { i8, i32, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { i8, i64, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { i8, i128, #[stable(feature = "i128", since = "1.26.0")] }
impl_from! { i8, isize, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { i16, i32, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { i16, i64, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { i16, i128, #[stable(feature = "i128", since = "1.26.0")] }
impl_from! { i32, i64, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { i32, i128, #[stable(feature = "i128", since = "1.26.0")] }
impl_from! { i64, i128, #[stable(feature = "i128", since = "1.26.0")] }

// Unsigned -> Signed
impl_from! { u8, i16, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u8, i32, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u8, i64, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u8, i128, #[stable(feature = "i128", since = "1.26.0")] }
impl_from! { u16, i32, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u16, i64, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u16, i128, #[stable(feature = "i128", since = "1.26.0")] }
impl_from! { u32, i64, #[stable(feature = "lossless_int_conv", since = "1.5.0")] }
impl_from! { u32, i128, #[stable(feature = "i128", since = "1.26.0")] }
impl_from! { u64, i128, #[stable(feature = "i128", since = "1.26.0")] }

// C99 标准在 INTPTR_MIN，INTPTR_MAX 和 UINTPTR_MAX 上定义了边界，这意味着指针大小的整数必须至少为 16 位：
//
// https://port70.net/~nsz/c/c99/n1256.html#7.18.2.4
impl_from! { u16, usize, #[stable(feature = "lossless_iusize_conv", since = "1.26.0")] }
impl_from! { u8, isize, #[stable(feature = "lossless_iusize_conv", since = "1.26.0")] }
impl_from! { i16, isize, #[stable(feature = "lossless_iusize_conv", since = "1.26.0")] }

// RISC-V 定义了 128 位地址空间 (RV128) 的可能性。

// CHERI 提出了 256 位权限。不清楚这是否与 usize/isize 有关。
// https://www.cl.cam.ac.uk/research/security/ctsrd/pdfs/20171017a-cheri-poster.pdf
// https://www.csl.sri.com/users/neumann/2012resolve-cheri.pdf

// Note: 如果整数适合有效位数，则整数只能以浮点数精确表示，有效位数在 f32 中为 24 位，在 f64 中为 53 位。
//
// 目前没有实现有损浮点转换。

// Signed -> Float
impl_from! { i8, f32, #[stable(feature = "lossless_float_conv", since = "1.6.0")] }
impl_from! { i8, f64, #[stable(feature = "lossless_float_conv", since = "1.6.0")] }
impl_from! { i16, f32, #[stable(feature = "lossless_float_conv", since = "1.6.0")] }
impl_from! { i16, f64, #[stable(feature = "lossless_float_conv", since = "1.6.0")] }
impl_from! { i32, f64, #[stable(feature = "lossless_float_conv", since = "1.6.0")] }

// Unsigned -> Float
impl_from! { u8, f32, #[stable(feature = "lossless_float_conv", since = "1.6.0")] }
impl_from! { u8, f64, #[stable(feature = "lossless_float_conv", since = "1.6.0")] }
impl_from! { u16, f32, #[stable(feature = "lossless_float_conv", since = "1.6.0")] }
impl_from! { u16, f64, #[stable(feature = "lossless_float_conv", since = "1.6.0")] }
impl_from! { u32, f64, #[stable(feature = "lossless_float_conv", since = "1.6.0")] }

// Float -> Float
impl_from! { f32, f64, #[stable(feature = "lossless_float_conv", since = "1.6.0")] }

// bool -> Float
#[stable(feature = "float_from_bool", since = "1.68.0")]
impl From<bool> for f32 {
    /// 无损地将 `bool` 转换为 `f32`。`false` 的结果值为正 `0.0`，`true` 值为 `1.0`。
    ///
    /// # Examples
    ///
    /// ```
    /// let x: f32 = false.into();
    /// assert_eq!(x, 0.0);
    /// assert!(x.is_sign_positive());
    ///
    /// let y: f32 = true.into();
    /// assert_eq!(y, 1.0);
    /// ```
    #[inline]
    fn from(small: bool) -> Self {
        small as u8 as Self
    }
}
#[stable(feature = "float_from_bool", since = "1.68.0")]
impl From<bool> for f64 {
    /// 无损地将 `bool` 转换为 `f64`。`false` 的结果值为正 `0.0`，`true` 值为 `1.0`。
    ///
    /// # Examples
    ///
    /// ```
    /// let x: f64 = false.into();
    /// assert_eq!(x, 0.0);
    /// assert!(x.is_sign_positive());
    ///
    /// let y: f64 = true.into();
    /// assert_eq!(y, 1.0);
    /// ```
    #[inline]
    fn from(small: bool) -> Self {
        small as u8 as Self
    }
}

// 没有违反边界的可能
macro_rules! try_from_unbounded {
    ($source:ty, $($target:ty),*) => {$(
        #[stable(feature = "try_from", since = "1.34.0")]
        impl TryFrom<$source> for $target {
            type Error = TryFromIntError;

            /// 尝试从源号码类型创建目标号码类型。
            /// 如果源值超出目标类型的范围，则返回错误。
            ///
            #[inline]
            fn try_from(value: $source) -> Result<Self, Self::Error> {
                Ok(value as Self)
            }
        }
    )*}
}

// 只有负边界
macro_rules! try_from_lower_bounded {
    ($source:ty, $($target:ty),*) => {$(
        #[stable(feature = "try_from", since = "1.34.0")]
        impl TryFrom<$source> for $target {
            type Error = TryFromIntError;

            /// 尝试从源号码类型创建目标号码类型。
            /// 如果源值超出目标类型的范围，则返回错误。
            ///
            #[inline]
            fn try_from(u: $source) -> Result<Self, Self::Error> {
                if u >= 0 {
                    Ok(u as Self)
                } else {
                    Err(TryFromIntError(()))
                }
            }
        }
    )*}
}

// 无符号到有符号 (仅正向)
macro_rules! try_from_upper_bounded {
    ($source:ty, $($target:ty),*) => {$(
        #[stable(feature = "try_from", since = "1.34.0")]
        impl TryFrom<$source> for $target {
            type Error = TryFromIntError;

            /// 尝试从源号码类型创建目标号码类型。
            /// 如果源值超出目标类型的范围，则返回错误。
            ///
            #[inline]
            fn try_from(u: $source) -> Result<Self, Self::Error> {
                if u > (Self::MAX as $source) {
                    Err(TryFromIntError(()))
                } else {
                    Ok(u as Self)
                }
            }
        }
    )*}
}

// 所有其他情况
macro_rules! try_from_both_bounded {
    ($source:ty, $($target:ty),*) => {$(
        #[stable(feature = "try_from", since = "1.34.0")]
        impl TryFrom<$source> for $target {
            type Error = TryFromIntError;

            /// 尝试从源号码类型创建目标号码类型。
            /// 如果源值超出目标类型的范围，则返回错误。
            ///
            #[inline]
            fn try_from(u: $source) -> Result<Self, Self::Error> {
                let min = Self::MIN as $source;
                let max = Self::MAX as $source;
                if u < min || u > max {
                    Err(TryFromIntError(()))
                } else {
                    Ok(u as Self)
                }
            }
        }
    )*}
}

macro_rules! rev {
    ($mac:ident, $source:ty, $($target:ty),*) => {$(
        $mac!($target, $source);
    )*}
}

// 符号内转换
try_from_upper_bounded!(u16, u8);
try_from_upper_bounded!(u32, u16, u8);
try_from_upper_bounded!(u64, u32, u16, u8);
try_from_upper_bounded!(u128, u64, u32, u16, u8);

try_from_both_bounded!(i16, i8);
try_from_both_bounded!(i32, i16, i8);
try_from_both_bounded!(i64, i32, i16, i8);
try_from_both_bounded!(i128, i64, i32, i16, i8);

// unsigned-to-signed
try_from_upper_bounded!(u8, i8);
try_from_upper_bounded!(u16, i8, i16);
try_from_upper_bounded!(u32, i8, i16, i32);
try_from_upper_bounded!(u64, i8, i16, i32, i64);
try_from_upper_bounded!(u128, i8, i16, i32, i64, i128);

// signed-to-unsigned
try_from_lower_bounded!(i8, u8, u16, u32, u64, u128);
try_from_lower_bounded!(i16, u16, u32, u64, u128);
try_from_lower_bounded!(i32, u32, u64, u128);
try_from_lower_bounded!(i64, u64, u128);
try_from_lower_bounded!(i128, u128);
try_from_both_bounded!(i16, u8);
try_from_both_bounded!(i32, u16, u8);
try_from_both_bounded!(i64, u32, u16, u8);
try_from_both_bounded!(i128, u64, u32, u16, u8);

// usize/isize
try_from_upper_bounded!(usize, isize);
try_from_lower_bounded!(isize, usize);

#[cfg(target_pointer_width = "16")]
mod ptr_try_from_impls {
    use super::TryFromIntError;
    use crate::convert::TryFrom;

    try_from_upper_bounded!(usize, u8);
    try_from_unbounded!(usize, u16, u32, u64, u128);
    try_from_upper_bounded!(usize, i8, i16);
    try_from_unbounded!(usize, i32, i64, i128);

    try_from_both_bounded!(isize, u8);
    try_from_lower_bounded!(isize, u16, u32, u64, u128);
    try_from_both_bounded!(isize, i8);
    try_from_unbounded!(isize, i16, i32, i64, i128);

    rev!(try_from_upper_bounded, usize, u32, u64, u128);
    rev!(try_from_lower_bounded, usize, i8, i16);
    rev!(try_from_both_bounded, usize, i32, i64, i128);

    rev!(try_from_upper_bounded, isize, u16, u32, u64, u128);
    rev!(try_from_both_bounded, isize, i32, i64, i128);
}

#[cfg(target_pointer_width = "32")]
mod ptr_try_from_impls {
    use super::TryFromIntError;
    use crate::convert::TryFrom;

    try_from_upper_bounded!(usize, u8, u16);
    try_from_unbounded!(usize, u32, u64, u128);
    try_from_upper_bounded!(usize, i8, i16, i32);
    try_from_unbounded!(usize, i64, i128);

    try_from_both_bounded!(isize, u8, u16);
    try_from_lower_bounded!(isize, u32, u64, u128);
    try_from_both_bounded!(isize, i8, i16);
    try_from_unbounded!(isize, i32, i64, i128);

    rev!(try_from_unbounded, usize, u32);
    rev!(try_from_upper_bounded, usize, u64, u128);
    rev!(try_from_lower_bounded, usize, i8, i16, i32);
    rev!(try_from_both_bounded, usize, i64, i128);

    rev!(try_from_unbounded, isize, u16);
    rev!(try_from_upper_bounded, isize, u32, u64, u128);
    rev!(try_from_unbounded, isize, i32);
    rev!(try_from_both_bounded, isize, i64, i128);
}

#[cfg(target_pointer_width = "64")]
mod ptr_try_from_impls {
    use super::TryFromIntError;
    use crate::convert::TryFrom;

    try_from_upper_bounded!(usize, u8, u16, u32);
    try_from_unbounded!(usize, u64, u128);
    try_from_upper_bounded!(usize, i8, i16, i32, i64);
    try_from_unbounded!(usize, i128);

    try_from_both_bounded!(isize, u8, u16, u32);
    try_from_lower_bounded!(isize, u64, u128);
    try_from_both_bounded!(isize, i8, i16, i32);
    try_from_unbounded!(isize, i64, i128);

    rev!(try_from_unbounded, usize, u32, u64);
    rev!(try_from_upper_bounded, usize, u128);
    rev!(try_from_lower_bounded, usize, i8, i16, i32, i64);
    rev!(try_from_both_bounded, usize, i128);

    rev!(try_from_unbounded, isize, u16, u32);
    rev!(try_from_upper_bounded, isize, u64, u128);
    rev!(try_from_unbounded, isize, i32, i64);
    rev!(try_from_both_bounded, isize, i128);
}

// 非零整数类型的转换 traits
use crate::num::NonZeroI128;
use crate::num::NonZeroI16;
use crate::num::NonZeroI32;
use crate::num::NonZeroI64;
use crate::num::NonZeroI8;
use crate::num::NonZeroIsize;
use crate::num::NonZeroU128;
use crate::num::NonZeroU16;
use crate::num::NonZeroU32;
use crate::num::NonZeroU64;
use crate::num::NonZeroU8;
use crate::num::NonZeroUsize;

macro_rules! nzint_impl_from {
    ($Small: ty, $Large: ty, #[$attr:meta], $doc: expr) => {
        #[$attr]
        impl From<$Small> for $Large {
            // impl 块上的 Rustdocs 显示了一个 "[+] 显示未记录的项" 切换。
            // 函数上的 Rustdocs 不支持。
            #[doc = $doc]
            #[inline]
            fn from(small: $Small) -> Self {
                // SAFETY: 输入类型保证值非零
                unsafe {
                    Self::new_unchecked(From::from(small.get()))
                }
            }
        }
    };
    ($Small: ty, $Large: ty, #[$attr:meta]) => {
        nzint_impl_from!($Small,
                   $Large,
                   #[$attr],
                   concat!("Converts `",
                           stringify!($Small),
                           "` to `",
                           stringify!($Large),
                           "` losslessly."));
    }
}

// 非零无符号 -> 非零无符号
nzint_impl_from! { NonZeroU8, NonZeroU16, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU8, NonZeroU32, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU8, NonZeroU64, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU8, NonZeroU128, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU8, NonZeroUsize, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU16, NonZeroU32, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU16, NonZeroU64, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU16, NonZeroU128, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU16, NonZeroUsize, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU32, NonZeroU64, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU32, NonZeroU128, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU64, NonZeroU128, #[stable(feature = "nz_int_conv", since = "1.41.0")] }

// 非零有符号 -> 非零有符号
nzint_impl_from! { NonZeroI8, NonZeroI16, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroI8, NonZeroI32, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroI8, NonZeroI64, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroI8, NonZeroI128, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroI8, NonZeroIsize, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroI16, NonZeroI32, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroI16, NonZeroI64, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroI16, NonZeroI128, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroI16, NonZeroIsize, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroI32, NonZeroI64, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroI32, NonZeroI128, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroI64, NonZeroI128, #[stable(feature = "nz_int_conv", since = "1.41.0")] }

// 非零无符号 -> 非零有符号
nzint_impl_from! { NonZeroU8, NonZeroI16, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU8, NonZeroI32, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU8, NonZeroI64, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU8, NonZeroI128, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU8, NonZeroIsize, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU16, NonZeroI32, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU16, NonZeroI64, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU16, NonZeroI128, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU32, NonZeroI64, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU32, NonZeroI128, #[stable(feature = "nz_int_conv", since = "1.41.0")] }
nzint_impl_from! { NonZeroU64, NonZeroI128, #[stable(feature = "nz_int_conv", since = "1.41.0")] }

macro_rules! nzint_impl_try_from_int {
    ($Int: ty, $NonZeroInt: ty, #[$attr:meta], $doc: expr) => {
        #[$attr]
        impl TryFrom<$Int> for $NonZeroInt {
            type Error = TryFromIntError;

            // impl 块上的 Rustdocs 显示了一个 "[+] 显示未记录的项" 切换。
            // 函数上的 Rustdocs 不支持。
            #[doc = $doc]
            #[inline]
            fn try_from(value: $Int) -> Result<Self, Self::Error> {
                Self::new(value).ok_or(TryFromIntError(()))
            }
        }
    };
    ($Int: ty, $NonZeroInt: ty, #[$attr:meta]) => {
        nzint_impl_try_from_int!($Int,
                                 $NonZeroInt,
                                 #[$attr],
                                 concat!("Attempts to convert `",
                                         stringify!($Int),
                                         "` to `",
                                         stringify!($NonZeroInt),
                                         "`."));
    }
}

// Int -> 非零 Int
nzint_impl_try_from_int! { u8, NonZeroU8, #[stable(feature = "nzint_try_from_int_conv", since = "1.46.0")] }
nzint_impl_try_from_int! { u16, NonZeroU16, #[stable(feature = "nzint_try_from_int_conv", since = "1.46.0")] }
nzint_impl_try_from_int! { u32, NonZeroU32, #[stable(feature = "nzint_try_from_int_conv", since = "1.46.0")] }
nzint_impl_try_from_int! { u64, NonZeroU64, #[stable(feature = "nzint_try_from_int_conv", since = "1.46.0")] }
nzint_impl_try_from_int! { u128, NonZeroU128, #[stable(feature = "nzint_try_from_int_conv", since = "1.46.0")] }
nzint_impl_try_from_int! { usize, NonZeroUsize, #[stable(feature = "nzint_try_from_int_conv", since = "1.46.0")] }
nzint_impl_try_from_int! { i8, NonZeroI8, #[stable(feature = "nzint_try_from_int_conv", since = "1.46.0")] }
nzint_impl_try_from_int! { i16, NonZeroI16, #[stable(feature = "nzint_try_from_int_conv", since = "1.46.0")] }
nzint_impl_try_from_int! { i32, NonZeroI32, #[stable(feature = "nzint_try_from_int_conv", since = "1.46.0")] }
nzint_impl_try_from_int! { i64, NonZeroI64, #[stable(feature = "nzint_try_from_int_conv", since = "1.46.0")] }
nzint_impl_try_from_int! { i128, NonZeroI128, #[stable(feature = "nzint_try_from_int_conv", since = "1.46.0")] }
nzint_impl_try_from_int! { isize, NonZeroIsize, #[stable(feature = "nzint_try_from_int_conv", since = "1.46.0")] }

macro_rules! nzint_impl_try_from_nzint {
    ($From:ty => $To:ty, $doc: expr) => {
        #[stable(feature = "nzint_try_from_nzint_conv", since = "1.49.0")]
        impl TryFrom<$From> for $To {
            type Error = TryFromIntError;

            // impl 块上的 Rustdocs 显示了一个 "[+] 显示未记录的项" 切换。
            // 函数上的 Rustdocs 不支持。
            #[doc = $doc]
            #[inline]
            fn try_from(value: $From) -> Result<Self, Self::Error> {
                TryFrom::try_from(value.get()).map(|v| {
                    // SAFETY: $From 是 NonZero 类型，因此 v 不为零。
                    unsafe { Self::new_unchecked(v) }
                })
            }
        }
    };
    ($To:ty: $($From: ty),*) => {$(
        nzint_impl_try_from_nzint!(
            $From => $To,
            concat!(
                "Attempts to convert `",
                stringify!($From),
                "` to `",
                stringify!($To),
                "`.",
            )
        );
    )*};
}

// 非零 int -> 非零无符号 int
nzint_impl_try_from_nzint! { NonZeroU8: NonZeroI8, NonZeroU16, NonZeroI16, NonZeroU32, NonZeroI32, NonZeroU64, NonZeroI64, NonZeroU128, NonZeroI128, NonZeroUsize, NonZeroIsize }
nzint_impl_try_from_nzint! { NonZeroU16: NonZeroI8, NonZeroI16, NonZeroU32, NonZeroI32, NonZeroU64, NonZeroI64, NonZeroU128, NonZeroI128, NonZeroUsize, NonZeroIsize }
nzint_impl_try_from_nzint! { NonZeroU32: NonZeroI8, NonZeroI16, NonZeroI32, NonZeroU64, NonZeroI64, NonZeroU128, NonZeroI128, NonZeroUsize, NonZeroIsize }
nzint_impl_try_from_nzint! { NonZeroU64: NonZeroI8, NonZeroI16, NonZeroI32, NonZeroI64, NonZeroU128, NonZeroI128, NonZeroUsize, NonZeroIsize }
nzint_impl_try_from_nzint! { NonZeroU128: NonZeroI8, NonZeroI16, NonZeroI32, NonZeroI64, NonZeroI128, NonZeroUsize, NonZeroIsize }
nzint_impl_try_from_nzint! { NonZeroUsize: NonZeroI8, NonZeroI16, NonZeroU32, NonZeroI32, NonZeroU64, NonZeroI64, NonZeroU128, NonZeroI128, NonZeroIsize }

// 非零 int -> 非零有符号 int
nzint_impl_try_from_nzint! { NonZeroI8: NonZeroU8, NonZeroU16, NonZeroI16, NonZeroU32, NonZeroI32, NonZeroU64, NonZeroI64, NonZeroU128, NonZeroI128, NonZeroUsize, NonZeroIsize }
nzint_impl_try_from_nzint! { NonZeroI16: NonZeroU16, NonZeroU32, NonZeroI32, NonZeroU64, NonZeroI64, NonZeroU128, NonZeroI128, NonZeroUsize, NonZeroIsize }
nzint_impl_try_from_nzint! { NonZeroI32: NonZeroU32, NonZeroU64, NonZeroI64, NonZeroU128, NonZeroI128, NonZeroUsize, NonZeroIsize }
nzint_impl_try_from_nzint! { NonZeroI64: NonZeroU64, NonZeroU128, NonZeroI128, NonZeroUsize, NonZeroIsize }
nzint_impl_try_from_nzint! { NonZeroI128: NonZeroU128, NonZeroUsize, NonZeroIsize }
nzint_impl_try_from_nzint! { NonZeroIsize: NonZeroU16, NonZeroU32, NonZeroI32, NonZeroU64, NonZeroI64, NonZeroU128, NonZeroI128, NonZeroUsize }